Jxh-515A One-Component Room Temperature Curing Silicone Sealant

• Type: Sellotape
• Material: PVC
• Usage: Lamp Use
• Adhesive: Water Based Glue
• Waterproof: Waterproof
• Temperature- Resistance: Normal Temperature
• Model NO.: MZL-JXH-515A
• Color: White
• Compressive Shear Strength: 15MPa/72h.
• Transport Package: Color Box/ White Box
• Specification: ce
• Trademark: magellen
• Origin: Guangdong Jiangmen
• HS Code: 9405409000
• Production Capacity: 10000PCS/Year

Product Description

Performance and Usage:
This product is a one-component room temperature curing silicone rubber. In metal hose or sealed container can be long-term preservation (greater than for most materials are adhesive has good sealing performance, excellent electrical insulation, moistureproof, water resistant, corona, and shock absorption buffer role, has good high and low temperature resistance, temperature tolerance range is 60 ~ + 300 ºC; the product non-toxic, resistance to outdoor excellent aging resistance, long service life; do not contain any solvents, no oil leakage, excellent comprehensive performance, thin consistency can be adjusted according to user requirements. It is mainly used for bonding of energy-saving lamps and other electronic components.
Technology and Parameter:

Performance index		JXH-515A
Before the curing	Appearance	White sticky
	Viscosity pa.s	7~30
	Surface drying time (min)h	5~30
Completely curing time (2~3mm)		12~24
After the curing	Temperature resistance ºC	-60ºC~+300ºC
	Breaking strength mpa≥	2.0
	Elongation at break ≥	200
	Shear strength   mpa≥	1.5
	Peel strength   KN/M	1.2
	Shaw hardnessA    ≥	>40
	Surface resistivity   Ω≥	5.0×10^14
	Volume resistivity Ω.cm≥	1×10^15
	Dielectric constant 10^6HZ≤	3.0
	Dielectric loss tangent value 10^6HZ≤	1.5×10^-3
	Breakdown strength KV/mm≥	15
	Maximum depth solidification mm	3~5

 
Usage and Description:
1.     Cleaning: it will be glued or be coated surfaces clean, remove rust, dirt and grease, etc.
2.     Sizing: for plastic packaging,it uses the blade cutting open the front tip part, set on the pointed mouth, the glue solution with extrusion gun into already clean the surface of the plastic (about 45 ml packaging,unscrewed the cap can glue),and will be folded sticky surface can be fixed.
3.     Curing: In curing coating good parts in the air, make the room temperature curing, solidified completely depending on the thickness, (2 ~ 3 mm thickness, room temperature 25 ºC, 50% humidity, 24 hours can be completely cured.)
4.     Announcements: After the completion of the operation, not rubber sealed immediately after use. When used again, if there is a little crust pincer-like device, remove the can, does not affect the normal use.
5.     Packing: 400g/piece,50 pieces/box